Tire circumference setting function.

1.According to bicycle tire circumference setting.

Speed function:

2.Instantaneous driving speed SPD.

3.Maximum driving speed MXS.

4.Average speed AVS.

5.Compared with the mean speed of the vehicle.

Wheel rotation function.

6.R (this new product does not have this function)

Mileage function (English/public switching)

7.ODO.

8.Single driving range DST.

9.The total mileage initial value is set. If the battery is replaced, the pre-change value can be set as the initial value.

Function of time

10.Running time TM

11.Clock (12 hours /24 hours switching) CLK.

Automatic circular display function.


13.The functions of ODO, DST, MXS, AVS, TM, R and CLK can automatically scroll and display SCAN every 4 seconds.

Driving data sampling function.

14.Real-time data sampling, professional testing, including DST TM AVS MXS.

Power saving function

15.There is no input signal in 30 seconds and automatically enters the power-saving mode, showing only the time.

Maintenance reminder function

16.When the total mileage reaches the set maintenance value, the wrench symbol is displayed to remind the maintenance bike.

Waterproof function

17.It has good waterproof function.

Installation tips:
1. Install the head seat to the handlebar;
2. Put the AG13 button battery into the battery tank on the back of the head.
3. To initialize the code table data, it is generally necessary to set a single parameter of the tire circumference to be used normally;
3. The head is inserted into the head seat chute;
4. Install the sensor on the front fork and feel the head part on the spokes;
5. The induction magnet is installed on the spokes, aligned with the sensor head, and is about 3 to 5 millimeters apart.
6. Fixed cable with nylon tie;
7. Check whether the above head seat, sensor and induction magnet are firmly installed.
This package contains necessary rubber gaskets and detailed instructions in both English and Chinese to ensure your installation is successful.
8. Please refer to the manual setting for more functions.

Set the function
1. The battery pack and the battery groove on the back of the head;
2. Press right to enter the circumference of the tire circumference in 15 seconds;
3. Refer to the wheel diameter and the circumference comparison table, for example, the circumference of the 28 model wheel is 224cm, and the three values are set to 224 by the left button (the machine is set to 208cm).
4. Right click;
5. Please refer to the manual setting for more functions.